1956 Chevy Passenger Car Linkage Kit
This kit consists of the best reproduced parts available, a New OEM fork ball stud with the addition of a original equipment z-bar.
This kit will get you from the clutch pedal to the bellhousing and will work as intended.
1- Clutch Fork Push Rod Kit - This is a copy of GM part # 3743570 and includes the rod, swivel, anti rattle spring, cotter pin and #3738054 pin .
1- Clutch Fork (R) - This is a copy of GM Part # 3737454 clutch release fork (may have slight surface rust, that came from the supplier).
1- Push Rod Spring Kit - This kit has a copy of GM part numbers 371704 Spring, 103340 Washer and 103378 Cotter pin.
1- Z Bar Bushing and Bolt Kit - This kit has a copy of GM part numbers 3716811 bushing, 3716807 shoulder bolt, and a 1/4" Nylon lock nut.
1- Z-bar - This is a nearly new GM part # 3726089 equalizer shaft, that is far superior to reproductions. This particular part has like new holes and it has been bead blasted and painted.
1- Frame Bracket - This is a correct copy of GM part # 3726098. This is welded to your frame.
1- Z Bar to Bellhousing Bracket - This is a correct copy of GM part # 3726096 bracket. This bolts to the bellhousing.
2- 3/8"-16 x 1" Bolts - These bolts are used to attach the bellhousing bracket to the bellhousing.
2- 3/8" Z Bar to Bellhousing Bracket Lock Washers - These lock washers are used to attach the bellhousing bracket to the bellhousing.
4- 3/8" Z Bar to Bellhousing Bracket Flat Washers - These washers are used to get the proper distance between the z-bar brackets.
1- Clutch Pedal Push Rod - This is a copy of GM part # 3709574 upper push rod.
1- New GM Part #3729000 Clutch Fork Ball Stud.