1964-66 Lemans/Tempest/ GTO, Skylark, Special, GS Clutch Release Linkage Kit
This kit is a 4 Speed Conversions exclusive set, that is a combination of OEM new, N.O.S. and reproduction parts. I offer this for automatic to manual transmission conversion, and as an alternative to searching for, paying for, and then repairing original parts.
This kit has all the parts needed between the clutch pedal and the throw out bearing, minus the clutch pedal push rod seal and it's retainer. I sell the seal (my part #418
) and retainer (my part #397
) separately or in a kit (my part #537
). The reproduced z-bar will not work with original style rods without wearing out quickly. This kit should give you much more longevity.This kit includes:
1- Heim Jointed Clutch Pedal Push Rod (set to the same length as GM Part # 9774625) (with bolts and nylock nuts)
1- Reproduction of GM Part # 9785392 Zbar This part is deemed JUNK. There isn't enough of a lip on the inside to retain the stud seats.
2- New OEM GM Part #3743349 Ball Stud Seats
1- New OEM GM Part #3898610 Frame Side Ball Stud
1- Reproduction of GM Part #3750696 Retaining Spring
1- Reproduction of GM Part #3840841 Frame Bracket (Welds on Frame)
1- 3/8"-16 Stainless Steel Hex Nut
1- 3/8" Lock Washer
1- Reproduction of GM Part #3866568 Engine Side Ball Stud
1- Heim Jointed Clutch Fork Push Rod (with bolts and nylock nuts)
1- Reproduction of GM Part #9787069 Clutch Release Fork
1- Reproduction Clutch Return Spring
1- Reproduction Anti Rattle Spring
1- Reproduction Return Spring Bracket (Welds onto Firewall)
1- New OEM GM Part #3729000 Clutch Fork Ball Stud (Screws into Bellhousing)
This part will be discontinued until we can find a suitable replacement for the zbar.